Grossing Tables, Wall Design, Electrically Height-Adjustable, Width 1500 mm
This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-E-1500 model includes the following features:
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Infinitely Height adjustable from 750 to 1000 mm by means of an integrated electric dive
- Height adjustable through UP/Down buttons
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust
- Mixing tap with detachable cold and hot water shower
- Very sturdy, perforated and insertable working plates (10 mm lower than the surrounding border) drilling D17, T60
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Exhaust duct at the right side

TECHNICAL DATA
Dimensions W/D/H: 1500 x 750 x 750/1000 mm
Exhaust air capacity: 750 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 900 x 670 mm
Cold / Warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-E-1500




Grossing Tables, Wall Design, Electrically Height-Adjustable, Width 1750 mm
This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-E-1750 model includes the following features:
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Infinitely Height adjustable from 750 to 1000 mm by means of an integrated electric dive
- Height adjustable through UP/Down buttons
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust
- Mixing tap with detachable cold and hot water shower
- Very sturdy, perforated and insertable working plates (10 mm lower than the surrounding border) drilling D17, T60
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 1750 x 750 x 750/1000 mm
Exhaust air capacity: 950 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: brushed stainless steel – material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1150 x 670 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-E-1750




Grossing Tables, Wall Design, Electrically Height-Adjustable, Width 2000 mm
This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-E-2000 model includes the following features:
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Infinitely Height adjustable from 750 to 1000 mm by means of an integrated electric dive
- Height adjustable through UP/Down buttons
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust
- Mixing tap with detachable cold and hot water shower
- Very sturdy, perforated and insertable working plates (10 mm lower than the surrounding border) drilling D17, T60
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 2000 x 750 x 750/1000 mm
Exhaust air capacity: 1100 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1400 x 670 mm
Cold / Warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-E-2000




Grossing Tables, Wall Design, Electrically Height-Adjustable, Width 2250 mm
This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-E-2250 model includes the following features:
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Infinitely Height adjustable from 750 to 1000 mm by means of an integrated electric dive
- Height adjustable through UP/Down buttons
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust
- Mixing tap with detachable cold and hot water shower
- Very sturdy, perforated and insertable working plates (10 mm lower than the surrounding border) drilling D17, T60
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 2250 x 750 x 750/1000 mm
Exhaust air capacity: 1200 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1650 x 670 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-E-2250




Grossing Tables, Wall Design, Electrically Height-Adjustable, Width 2500 mm
This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-E-2500 model includes the following features:
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Infinitely Height adjustable from 750 to 1000 mm by means of an integrated electric dive
- Height adjustable through UP/Down buttons
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust
- Mixing tap with detachable cold and hot water shower
- Very sturdy, perforated and insertable working plates (10 mm lower than the surrounding border) drilling D17, T60
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 2500 x 750 x 750/1000 mm
Exhaust air capacity: 1500 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1960 x 670 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-E-2500