Dual Grossing Table, Width 1500 mm, Height 900 mm
- Dual working station with down-draft system – 

This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-1500-D-900 model includes the following features:
- Dual working place with a large surface area 
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust at the right front side
- Very sturdy, perforated and insertable working plates (19 mm lower than the surrounding border) drilling D17, T60
- Air exhaust with air volume flow control
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Mixing tap with detachable cold and hot water shower 
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 1500 x 1000 x 900 mm
Exhaust air capacity: 1000 m³/h
Air speed at the perforated surface: min. 0.4 m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 960 x 920 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 200 mm

Type: UCS-1500-D-900



Dual Grossing Table, Width 1500 mm
- Dual working station with down-draft system – 

This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-1500-D model includes the following features:
- Dual working place with a large surface area 
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust at the right front side
- Very sturdy, perforated and insertable working plates (19 mm lower than the surrounding border) drilling D17, T60
- Air exhaust with air volume flow control
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Mixing tap with detachable cold and hot water shower 
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 1500 x 1000 x 750 mm
Exhaust air capacity: 1000 m³/h
Air speed at the perforated surface: min. 0.4 m/sec
Material: brushed stainless steel – material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 960 x 920 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 200 mm

Type: UCS-1500-D




Dual Grossing Table, Width 1750 mm, Height 900 mm
- Dual working station with down-draft system – 

This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-1750-D-900 model includes the following features:
- Dual working place with a large surface area 
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust at the right front side
- Very sturdy, perforated and insertable working plates (19 mm lower than the surrounding border) drilling D17, T60
- Air exhaust with air volume flow control
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Mixing tap with detachable cold and hot water shower 
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 1750 x 1000 x 900 mm
Exhaust air capacity: 1300 m³/h
Air speed at the perforated surface: min. 0.4 m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1210 x 920 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-1750-D-900




Dual Grossing Table, Width 1750 mm
- Dual working station with down-draft system – 

This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-1750-D model includes the following features:
- Dual working place with a large surface area 
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust at the right front side
- Very sturdy, perforated and insertable working plates (19 mm lower than the surrounding border) drilling D17, T60
- Air exhaust with air volume flow control
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Mixing tap with detachable cold and hot water shower 
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 1750 x 1000 x 750 mm
Exhaust air capacity: 1300 m³/h
Air speed at the perforated surface: min. 0.4 m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1210 x 920 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-1750-D


Country of Origin: Federal Republic of Germany (European Union)
 



Dual Grossing Table, Width 2000 mm, Height 900 mm
- Dual working station with down-draft system – 

This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-2000-D-900 model includes the following features:
- Dual working place with a large surface area 
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust at the right front side
- Very sturdy, perforated and insertable working plates (19 mm lower than the surrounding border) drilling D17, T60
- Air exhaust with air volume flow control
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Mixing tap with detachable cold and hot water shower 
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 2000 x 1000 x 900 mm
Exhaust air capacity: 1600 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1460 x 920 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-2000-D-900




Dual Grossing Table, Width 2000 mm
- Dual working station with down-draft system – 

This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-2000-D model includes the following features:
- Dual working place with a large surface area 
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust at the right front side
- Very sturdy, perforated and insertable working plates (19 mm lower than the surrounding border) drilling D17, T60
- Air exhaust with air volume flow control
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Mixing tap with detachable cold and hot water shower 
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 2000 x 1000 x 750 mm
Exhaust air capacity: 1600 m³/h
Air speed t the perforated surface: min. 0.4m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1460 x 920 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-2000-D




Dual Grossing Table, Width 2250 mm, Height 900 mm
- Dual working station with down-draft system – 

This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-2250-D-900 model includes the following features:
- Dual working place with a large surface area 
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust at the right front side
- Very sturdy, perforated and insertable working plates (19 mm lower than the surrounding border) drilling D17, T60
- Air exhaust with air volume flow control
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Mixing tap with detachable cold and hot water shower 
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 2250 x 1000 x 900 mm
Exhaust air capacity: 1900 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1700 x 920 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-2250-D-900




Dual Grossing Table, Width 2250 mm
- Dual working station with down-draft system – 

This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-2250-D model includes the following features:
- Dual working place with a large surface area 
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust at the right front side
- Very sturdy, perforated and insertable working plates (19 mm lower than the surrounding border) drilling D17, T60
- Air exhaust with air volume flow control
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Mixing tap with detachable cold and hot water shower 
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 2250 x 1000 x 750 mm
Exhaust air capacity: 1900 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: - approx. W/D 1700 x 920 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-2250-D



Dual Grossing Table, Width 2500 mm
- Dual working station with down-draft system – 

This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-2500-D model includes the following features:
- Dual working place with a large surface area 
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust at the right front side
- Very sturdy, perforated and insertable working plates (19 mm lower than the surrounding border) drilling D17, T60
- Air exhaust with air volume flow control
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Mixing tap with detachable cold and hot water shower 
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 2500 x 1000 x 750 mm
Exhaust air capacity: 1800 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1900 x 920 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-2500-D




Dual Grossing Table, Width 2500, Height 900 mm
- Dual working station with down-draft system – 

This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even well suited for small dissections. Airflow travels throughout the entire working area and is vacuumed out downwards, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system provided by the customer. 

The UCS-2500-D-900 model includes the following features:
- Dual working place with a large surface area 
- Entire construction is made of stainless steel
- Sturdy, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Work surface includes a seamlessly welded basin measuring 400 x 400 x 200 mm 
- Basin includes integrated air exhaust at the right front side
- Very sturdy, perforated and insertable working plates (19 mm lower than the surrounding border) drilling D17, T60
- Air exhaust with air volume flow control
- Integrated sprinkler system with adjustable valve for bath sanitation located underneath the perforated working plates 
- Formalin sink with sieve insert
- Mixing tap with detachable cold and hot water shower 
- Exhaust duct at the left or right side

TECHNICAL DATA
Dimensions W/D/H: 2500 x 1000 x 900 mm
Exhaust air capacity: 2100 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: brushed stainless steel– material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1900 x 920 mm
Cold / warm water connection ½”
Waste water connection 2”
Exhaust duct diameter 250 mm

Type: UCS-2500-D-900