Anatomy Autopsy Table AST 10/700 with Exhaust Air Extraction Unit
The anatomy autopsy table AST 10/700 serves to minimize the formalin charge for students and course participants and is to be connected to the site-mounted exhaust-system through an easy plug-in. The table is completely made of stainless steel (Material no. 1.4301 - ANSI 304). The undercarriage consists of stable, torsion-resistant profiles as well as 4 steerable and lockable wheels. At the small side, a body-tray is inserted, then closed and fixed at the same time by a flap. The upper ridge of the body tray is situated 10mm lower than the upper ridge of the table. All vapors are reliably down-drafted by a surrounding gap. The exhaust air socket is fixed in the center of the table. The position of the exhaust pipe permits even sedentary work at the table.

LM 80/103 body tray is not included in scope of delivery

Dimensions W/D/H: 720 x 2180 x 850 mm 
Material: Stainless steel, material no. 1.4301 - ANSI 304
Air connection: DN 200
Air capacity: min. 750 m³/h
Carrying capacity: max. 200 kg

Type: AST 10/700

Country of Origin: Federal Republic of Germany (European Union)




Anatomy Autopsy Table AST 10/700 with Exhaust Air Extraction Unit, Hydraulically Height-Adjustable 
The anatomy autopsy table AST 10/700-H serves to minimize the formalin charge for students and course participants and is to be connected to the site-mounted exhaust-system. The table is completely made of stainless steel (Material no. 1.4301 - ANSI 304). The undercarriage consists of sturdy, torsion-resistant stainless steel profiles as well as 4 steerable and lockable wheels. At the small side, a body-tray is inserted and then closed and fixed at the same time by a flap.. All vapors are reliably down-drafted by a 10 mm wide, surrounding gap. The surface of the body tray is 10 mm lower than the top edge of the table. The exhaust air socket is installed in the center of the table. A lid protects the exhaust air socket from water and other liquids. The back end of the table is height-adjustable by 100 mm by means of a hydraulic cylinder. 

4 removable and swivelling arm and foot rests are separately available upon request (type: SBAB-AST)

LM 80/103 body tray is not included in scope of delivery

Dimensions W/D/H: 720 x 2180 x 850 mm 
Material: Stainless steel Material no. 1.4301 - ANSI 304
Air connection: DN 200
Air capacity: min. 750 m³/h
Carrying capacity: max. 200 kg
Type: AST 10/700-H




Anatomy Autopsy Table AST 10/700 with Exhaust Air Extraction Unit, Height-Adjustable, Width 750 mm
The anatomy autopsy table AST 10/700-WTP-H serves to minimize the formalin charge for students and course participants and is to be connected to the site-mounted exhaust-system. The table is completely made of stainless steel (Material no. 1.4301 - ANSI 304). The undercarriage consists of sturdy, torsion-resistant stainless steel profiles as well as 4 steerable and lockable wheels. At the small side, a body-tray is inserted and then closed and fixed at the same time by a flap. All vapors are reliably down-drafted by a 10 mm wide, surrounding gap. The surface of the body tray is 10 mm lower than the top edge of the table.

4 removable and swivelling arm and foot rests are separately available upon request (type: SBAB-AST)

A hand crank for infinite height-adjustment is installed to the left rear side of the table.

WTP 10/650-C washing plate is not included in scope of delivery

Dimensions W/D/H: 850 x 2300 x 750 / 1000 mm
Air connection: DN 200
Waste drain: DN 50, 2"
Air capacity: min. 750 m³/h
Height-adjustment: 750 - 1000 mm
Carrying capacity: max. 200 kg

Type: AST 10/700-WTP-H