Morgue Cooling Box for 1 Body Tray for Standard Cooling from +10°C to -5°C - with 80 mm isolation – The morgue cooling boxes are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The box’ components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue cooling boxes are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - 1 lockable door with surrounding profile sealing - Door hinges can be either mounted on left or right side - Including name tag holders - Including roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable body trays Dimensions morgue cooling box W/D/H: 1210 x 2260 x 1210/1610 mm Dimensions door W/H: 800 x 800 mm Type: KB 1LM Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate KT-80 – 1 piece Body tray LM 80/100 – 1 piece Name tag holders made of chrome steel – 1 piece Cooling aggregate KT-80 (ceiling design): The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: +10°C to -5°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 860 Watt Rated Input (when normally running): 600 Watt Rated Input: 3.5 Amp Peak current: 15 Amp Max current: 4.6 Amp Defrost: Hot gas defrosting Weight: 42 kg Compressor: Type:Hermetic Normal power: 400 Watt Condenser: Air flow: 400 m³/h Evaporator: Air flow: 500 m³/h Air throw: 3 m (Standard / is affected by many factors) Dimensions W/D/H: 430 x 771 x 378 mm Dimensions Opening W/D: 355 x 306 mm (Distance between door and opening 670 mm) Type: KT 80 Body tray LM 80/100: Sturdy, deep-drawn seamless construction made of brushed stainless steel (material no. 1.4301) without welded corners or edges. Two closed skids at the bottom of the body tray serve for noiseless transport and prevent lateral tipping. A big sliding handle is mounted at each front end of the body tray (D=28 mm). The body tray is absolutely resistant to cleaning agents and disinfectants. Dimensions W/D/H: 2080 x 620 x 90 mm Carrying capacity: max. 200 kg Type: LM 80/100 Country of Origin: Federal Republic of Germany (European Union) Morgue Cooling Box for 1 Body Trays for Deep Freezing from -15°C to -25°C - with 80 mm isolation – The morgue cooling boxes are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The box’ components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue cooling boxes are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - 1 lockable door with surrounding profile sealing - Door hinges can be either mounted on left or right side - Including name tag holders - Including roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable body trays Dimensions morgue cooling box W/D/H: 1210 x 2260 x 1210/1610 mm Dimensions door W/H: 800 x 800 mm Type: KB 1LM Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate TKT-80 – 1 piece Body tray LM 80/100 – 1 piece Name tag holders made of chrome steel – 1 piece Cooling aggregate TKT-80 (ceiling design): The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: -15°C to -25°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity -20°C inside +40°C outside: 1117 Watt Rated Input (when normally running): 700 Watt Rated Input: 4.4 Amp Peak current: 30 Amp Max current: 7.6 Amp Defrost: Hot gas defrosting Weight: 68 kg Compressor: Type:Hermetic Normal power: 1300 Watt Condenser: Air flow: 750 m³/h Evaporator: Air flow: 550 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 620 x 719 x 357 mm Dimensions Opening W/D: 550 x 337 mm (Distance between door and opening 587 mm) Type: TKT 80 Body tray LM 80/100: Sturdy, deep-drawn seamless construction made of brushed stainless steel (material no. 1.4301) without welded corners or edges. Two closed skids at the bottom of the body tray serve for noiseless transport and prevent lateral tipping. A big sliding handle is mounted at each front end of the body tray (D=28 mm). The body tray is absolutely resistant to cleaning agents and disinfectants. Dimensions W/D/H: 2080 x 620 x 90 mm Carrying capacity: max. 200 kg Type: LM 80/100 Country of Origin: Federal Republic of Germany (European Union) Morgue Cooling Box for 2 Body Trays for Standard Cooling from +10°C to -5°C - with 80 mm isolation – The morgue cooling boxes are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The box’ components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue cooling boxes are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - 1 lockable door with surrounding profile sealing - Door hinges can be either mounted on left or right side - Including name tag holders - Including 2 roller tracks made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable body trays Dimensions morgue cooling box W/D/H: 1210 x 2260 x 1560/1960 mm Dimensions door W/H: 680 x 1200 mm Type: KB 2LM Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate KT-80 – 1 piece Body tray LM 80/100 – 2 pieces Name tag holders made of chrome steel – 2 pieces Cooling aggregate KT-80 (ceiling design): The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: +10°C to -5°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 860 Watt Rated Input (when normally running): 600 Watt Rated Input: 3.5 Amp Peak current: 15 Amp Max current: 4.6 Amp Defrost: Hot gas defrosting Weight: 42 kg Compressor: Type:Hermetic Normal power: 400 Watt Condenser: Air flow: 400 m³/h Evaporator: Air flow: 500 m³/h Air throw: 3 m (Standard / is affected by many factors) Dimensions W/D/H: 430 x 771 x 378 mm Dimensions Opening W/D: 355 x 306 mm (Distance between door and opening 670 mm) Type: KT 80 Body tray LM 80/100: Sturdy, deep-drawn seamless construction made of brushed stainless steel (material no. 1.4301) without welded corners or edges. Two closed skids at the bottom of the body tray serve for noiseless transport and prevent lateral tipping. A big sliding handle is mounted at each front end of the body tray (D=28 mm). The body tray is absolutely resistant to cleaning agents and disinfectants. Dimensions W/D/H: 2080 x 620 x 90 mm Carrying capacity: max. 200 kg Type: LM 80/100 Country of Origin: Federal Republic of Germany (European Union) Morgue Cooling Box for 2 Body Trays for Deep Freezing from -15°C to -25°C - with 80 mm isolation – The morgue cooling boxes are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The box’ components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue cooling boxes are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - 1 lockable door with surrounding profile sealing - Door hinges can be either mounted on left or right side - Including name tag holders - Including 2 roller tracks made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable body trays Dimensions morgue cooling box W/D/H: 1210 x 2260 x 1560/1960 mm Dimensions door W/H: 680 x 1200 mm Type: KB 2LM Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate TKT-80 – 1 piece Body tray LM 80/100 – 2 pieces Name tag holders made of chrome steel – 2 pieces Cooling aggregate TKT-80 (ceiling design): The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: -15°C to -25°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity -20°C inside +40°C outside: 1117 Watt Rated Input (when normally running): 700 Watt Rated Input: 4.4 Amp Peak current: 30 Amp Max current: 7.6 Amp Defrost: Hot gas defrosting Weight: 68 kg Compressor: Type:Hermetic Normal power: 1300 Watt Condenser: Air flow: 750 m³/h Evaporator: Air flow: 550 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 620 x 719 x 357 mm Dimensions Opening W/D: 550 x 337 mm (Distance between door and opening 587 mm) Type: TKT 80 Body tray LM 80/100: Sturdy, deep-drawn seamless construction made of brushed stainless steel (material no. 1.4301) without welded corners or edges. Two closed skids at the bottom of the body tray serve for noiseless transport and prevent lateral tipping. A big sliding handle is mounted at each front end of the body tray (D=28 mm). The body tray is absolutely resistant to cleaning agents and disinfectants. Dimensions W/D/H: 2080 x 620 x 90 mm Carrying capacity: max. 200 kg Type: LM 80/100 Country of Origin: Federal Republic of Germany (European Union)