Morgue Refrigeration Units for Lateral Loading for 1 Body Tray for Standard Cooling from +10°C to -5°C
- with 80 mm isolation –
The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. 

- The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request
- The floor is made of white powder-coated, galvanized steel
- Lockable door with surrounding profile sealing
- Door can be either opened upwards or downwards – please specify when ordering
- Including name tag holders
- Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device.
- Including suitable body trays 

Dimensions morgue refrigeration unit W/D/H: 2260 x 860 x 1660 mm
Dimensions door W/H: 2000 x 500 mm

Type: KZM Q 40/100

Country of Origin: Federal Republic of Germany (European Union)


Suitable accessories:
Cooling aggregate KT-80 – 1 piece
Shelf device REQ 30-01 – 1 piece
Body tray LM 80/101 – 1 piece
Name tag holders made of chrome steel – 1 piece


Cooling aggregate KT-80 (ceiling design):
The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug.

Refrigerant: R 404A
Ambient temperature: from +5°C to +45°C

Technical details:
Temperature range: +10°C to -5°C
Voltage: 230 V / 1 Ph / 50 Hz
Refrigeration capacity 0°C inside +40°C outside: 860 Watt
Rated Input (when normally running): 600 Watt
Rated Input: 3.5 Amp
Peak current: 15 Amp
Max current: 4.6 Amp
Defrost: Hot gas defrosting
Weight: 42 kg

Compressor:
Type:Hermetic
Normal power: 400 Watt

Condenser:
Air flow: 400 m³/h

Evaporator:
Air flow: 500 m³/h
Air throw: 3 m (Standard / is affected by many factors)

Dimensions W/D/H: 430 x 771 x 378 mm
Dimensions Opening W/D: 355 x 306 mm (Distance between door and opening 670 mm)

Type: KT 80


Shelf device REQ 30-01:
The shelf device serves to storage LM 80/101 body trays and is installed directly within a morgue refrigeration. The shelf device is loaded sideways by a lift and transport truck. The structure consists of rugged stainless steel profiles (Material 1.4301 – ANSI 304) which are equipped with two U-profiles to accommodate the body tray with 4 wheels. The shelf device will be delivered in single parts and is to be installed on location.

Dimensions W/D/H: 2100 x 700 x 100 mm
Carrying capacity: max. 150 kg

Type: REQ 30-01


Body tray LM 80/101:
The body tray serves to accommodate, store and transport bodies of deceased. A seamless deep-drawn, extremely rugged structure of ground stainless steel (material no. 1.4301 -ANSI 304) without welded corners and edges on the inside ensures perfect cleaning. 4 wheels under the body tray guarantee perfect handling for sideway loading into the morgue cooler. The body tray is absolutely resistant to cleaning agents and disinfectants.

Dimensions W/D/H: 1900 x 620 x 100 mm
Caring capacity: max. 200 kg

Type: LM 80/101


Additionally available at an extra charge:
- Door heating mounted on a small hatch or large door to prevent collection of condensation water when the morgue refrigeration unit is used in tropical environments
- Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches





Morgue Refrigeration Unit for Lateral Loading for 1 Body Trays for Deep Freezing from -15°C to -25°C
- with 80 mm isolation –
The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. 

- The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request
- The floor is made of white powder-coated, galvanized steel
- Lockable door with surrounding profile sealing
- Door can be either opened upwards or downwards – please specify when ordering
- Including name tag holders
- Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device.
- Including suitable body trays 

Dimensions morgue refrigeration unit W/D/H: 2260 x 860 x 1660 mm
Dimensions door W/H: 2000 x 500 mm

Type: KZM Q 40/100

Country of Origin: Federal Republic of Germany (European Union)


Suitable accessories:
Cooling aggregate TKT-80 – 1 piece
Shelf device REQ 30-01 – 1 piece
Body tray LM 80/101 – 1 piece
Name tag holders made of chrome steel – 1 piece


Cooling aggregate TKT-80 (ceiling design):
The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug.

Refrigerant: R 404A
Ambient temperature: from +5°C to +45°C

Technical details:
Temperature range: -15°C to -25°C
Voltage: 230 V / 1 Ph / 50 Hz
Refrigeration capacity -20°C inside +40°C outside: 1117 Watt
Rated Input (when normally running): 700 Watt
Rated Input: 4.4 Amp
Peak current: 30 Amp
Max current: 7.6 Amp
Defrost: Hot gas defrosting
Weight: 68 kg

Compressor:
Type:Hermetic
Normal power: 1300 Watt

Condenser:
Air flow: 750 m³/h

Evaporator:
Air flow: 550 m³/h
Air throw: 4 m (Standard / is affected by many factors)

Dimensions W/D/H: 620 x 719 x 357 mm
Dimensions Opening W/D: 550 x 337 mm (Distance between door and opening 587 mm)

Type: TKT 80



Shelf device REQ 30-01:
The shelf device serves to storage LM 80/101 body trays and is installed directly within a morgue refrigeration. The shelf device is loaded sideways by a lift and transport truck. The structure consists of rugged stainless steel profiles (Material 1.4301 – ANSI 304) which are equipped with two U-profiles to accommodate the body tray with 4 wheels. The shelf device will be delivered in single parts and is to be installed on location.

Dimensions W/D/H: 2100 x 700 x 100 mm
Carrying capacity: max. 150 kg

Type: REQ 30-01


Body tray LM 80/101:
The body tray serves to accommodate, store and transport bodies of deceased. A seamless deep-drawn, extremely rugged structure of ground stainless steel (material no. 1.4301 -ANSI 304) without welded corners and edges on the inside ensures perfect cleaning. 4 wheels under the body tray serve a perfect handling for sideway loading into the morgue cooler. The body tray is absolutely resistant to cleaning agents and disinfectants.

Dimensions W/D/H: 1900 x 620 x 100 mm
Caring capacity: max. 200 kg

Type: LM 80/101

Additionally available at an extra charge:
- Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches





Morgue Refrigeration Units for Lateral Loading for 2 Body Trays for Standard Cooling from +10°C to -5°C
- with 80 mm isolation –
The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. 

- The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request
- The floor is made of white powder-coated, galvanized steel
- Lockable doors with surrounding profile sealing
- Doors can be either opened upwards or downwards – please specify when ordering
- Including name tag holders
- Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device.
- Including suitable body trays 

Dimensions morgue refrigeration unit W/D/H: 2260 x 860 x 1960 mm
Dimensions doors W/H: 2000 x 500 mm

Type: KZM Q 40/200

Country of Origin: Federal Republic of Germany (European Union)


Suitable accessories:
Cooling aggregate KT-80 – 1 piece
Shelf device REQ 30-02 – 1 piece
Body tray LM 80/101 – 2 pieces
Name tag holders made of chrome steel – 2 pieces


Cooling aggregate KT-80 (ceiling design):
The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug.

Refrigerant: R 404A
Ambient temperature: from +5°C to +45°C

Technical details:
Temperature range: +10°C to -5°C
Voltage: 230 V / 1 Ph / 50 Hz
Refrigeration capacity 0°C inside +40°C outside: 860 Watt
Rated Input (when normally running): 600 Watt
Rated Input: 3.5 Amp
Peak current: 15 Amp
Max current: 4.6 Amp
Defrost: Hot gas defrosting
Weight: 42 kg

Compressor:
Type:Hermetic
Normal power: 400 Watt

Condenser:
Air flow: 400 m³/h

Evaporator:
Air flow: 500 m³/h
Air throw: 3 m (Standard / is affected by many factors)

Dimensions W/D/H: 430 x 771 x 378 mm
Dimensions Opening W/D: 355 x 306 mm (Distance between door and opening 670 mm)

Type: KT 80


Shelf device REQ 30-02:
The shelf device serves to storage LM 80/101 body trays and is installed directly within a morgue refrigeration. The shelf device is loaded sideways by a lift and transport truck. The structure consists of rugged stainless steel profiles (Material 1.4301 – ANSI 304) which are equipped with two U-profiles to accommodate the body tray with 4 wheels. The shelf device will be delivered in single parts and is to be installed on location.

Dimensions W/D/H: 2100 x 700 x 900 mm
Carrying capacity: max. 300 kg

Type: REQ 30-02


Body tray LM 80/101:
The body tray serves to accommodate, store and transport bodies of deceased. A seamless deep-drawn, extremely rugged structure of ground stainless steel (material no. 1.4301 -ANSI 304) without welded corners and edges on the inside ensures perfect cleaning. 4 wheels under the body tray serve a perfect handling for sideway loading into the morgue cooler. The body tray is absolutely resistant to cleaning agents and disinfectants.

Dimensions W/D/H: 1900 x 620 x 100 mm
Caring capacity: max. 200 kg

Type: LM 80/101


Additionally available at an extra charge:
- Door heating mounted on a small hatch or large door to prevent collection of condensation water when the morgue refrigeration unit is used in tropical environments
- Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches




Morgue Refrigeration Unit for Lateral Loading for 2 Body Trays for Deep Freezing from -15°C to -25°C
- with 80 mm isolation –
The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. 

- The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request
- The floor is made of white powder-coated, galvanized steel
- Lockable doors with surrounding profile sealing
- Doors can be either opened upwards or downwards – please specify when ordering
- Including name tag holders
- Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device.
- Including suitable body trays 

Dimensions morgue refrigeration unit W/D/H: 2260 x 860 x 1960 mm
Dimensions doors W/H: 2000 x 500 mm

Type: KZM Q 40/200

Country of Origin: Federal Republic of Germany (European Union)


Suitable accessories:
Cooling aggregate TKT-80 – 1 piece
Shelf device REQ 30-02 – 1 piece
Body tray LM 80/101 – 2 pieces
Name tag holders made of chrome steel – 2 pieces


Cooling aggregate TKT-80 (ceiling design):
The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug.

Refrigerant: R 404A
Ambient temperature: from +5°C to +45°C

Technical details:
Temperature range: -15°C to -25°C
Voltage: 230 V / 1 Ph / 50 Hz
Refrigeration capacity -20°C inside +40°C outside: 1117 Watt
Rated Input (when normally running): 700 Watt
Rated Input: 4.4 Amp
Peak current: 30 Amp
Max current: 7.6 Amp
Defrost: Hot gas defrosting
Weight: 68 kg

Compressor:
Type: Hermetic
Normal power: 1300 Watt

Condenser:
Air flow: 750 m³/h

Evaporator:
Air flow: 550 m³/h
Air throw: 4 m (Standard / is affected by many factors)

Dimensions W/D/H: 620 x 719 x 357 mm
Dimensions Opening W/D: 550 x 337 mm (Distance between door and opening 587 mm)

Type: TKT 80


Shelf device REQ 30-02:
The shelf device serves to storage LM 80/101 body trays and is installed directly within a morgue refrigeration. The shelf device is loaded sideways by a lift and transport truck. The structure consists of rugged stainless steel profiles (Material 1.4301 – ANSI 304) which are equipped with two U-profiles to accommodate the body tray with 4 wheels. The shelf device will be delivered in single parts and is to be installed on location.

Dimensions W/D/H: 2100 x 700 x 900 mm
Carrying capacity: max. 300 kg

Type: REQ 30-02


Body tray LM 80/101:
The body tray serves to accommodate, store and transport bodies of deceased. A seamless deep-drawn, extremely rugged structure of ground stainless steel (material no. 1.4301 -ANSI 304) without welded corners and edges on the inside ensures perfect cleaning. 4 wheels under the body tray serve a perfect handling for sideway loading into the morgue cooler. The body tray is absolutely resistant to cleaning agents and disinfectants.

Dimensions W/D/H: 1900 x 620 x 100 mm
Caring capacity: max. 200 kg

Type: LM 80/101



Additionally available at an extra charge:
- Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches




Morgue Refrigeration Units for Lateral Loading for 3 Body Trays for Standard Cooling from +10°C to -5°C
- with 80 mm isolation –
The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. 

- The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request
- The floor is made of white powder-coated, galvanized steel
- Lockable doors with surrounding profile sealing
- Doors can be either opened upwards or downwards – please specify when ordering
- Including name tag holders
- Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device.
- Including suitable body trays 

Dimensions morgue refrigeration unit W/D/H: 2260 x 860 x 1960 mm
Dimensions doors W/H: 2000 x 500 mm

Type: KZM Q 40/300

Country of Origin: Federal Republic of Germany (European Union)


Suitable accessories:
Cooling aggregate KT-80 – 1 piece
Shelf device REQ 30-03 – 1 piece
Body tray LM 80/101 – 3 pieces
Name tag holders made of chrome steel – 3 pieces


Cooling aggregate KT-80 (ceiling design):
The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug.

Refrigerant: R 404A
Ambient temperature: from +5°C to +45°C

Technical details:
Temperature range: +10°C to -5°C
Voltage: 230 V / 1 Ph / 50 Hz
Refrigeration capacity 0°C inside +40°C outside: 860 Watt
Rated Input (when normally running): 600 Watt
Rated Input: 3.5 Amp
Peak current: 15 Amp
Max current: 4.6 Amp
Defrost: Hot gas defrosting
Weight: 42 kg

Compressor:
Type:Hermetic
Normal power: 400 Watt

Condenser:
Air flow: 400 m³/h

Evaporator:
Air flow: 500 m³/h
Air throw: 3 m (Standard / is affected by many factors)

Dimensions W/D/H: 430 x 771 x 378 mm
Dimensions Opening W/D: 355 x 306 mm (Distance between door and opening 670 mm)

Type: KT 80


Shelf device REQ 30-03:
The shelf device serves to storage LM 80/101 body trays and is installed directly within a morgue refrigeration. The shelf device is loaded sideways by a lift and transport truck. The structure consists of rugged stainless steel profiles (Material 1.4301 – ANSI 304) which are equipped with two U-profiles to accommodate the body tray with 4 wheels. The shelf device will be delivered in single parts and is to be installed on location.

Dimensions W/D/H: 2100 x 700 x 1400 mm
Carrying capacity: max. 450kg

Type: REQ 30-03


Body tray LM 80/101:
The body tray serves to accommodate, store and transport bodies of deceased. A seamless deep-drawn, extremely rugged structure of ground stainless steel (material no. 1.4301 -ANSI 304) without welded corners and edges on the inside ensures perfect cleaning. 4 wheels under the body tray serve a perfect handling for sideway loading into the morgue cooler. The body tray is absolutely resistant to cleaning agents and disinfectants.

Dimensions W/D/H: 1900 x 620 x 100 mm
Caring capacity: max. 200 kg

Type: LM 80/101


Additionally available at an extra charge:
- Door heating mounted on a small hatch or large door to prevent collection of condensation water when the morgue refrigeration unit is used in tropical environments
- Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches




Morgue Refrigeration Unit for Lateral Loading for 3 Body Trays for Deep Freezing from -15°C to -25°C
- with 80 mm isolation –
The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. 

- The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request
- The floor is made of white powder-coated, galvanized steel
- Lockable doors with surrounding profile sealing
- Doors can be either opened upwards or downwards – please specify when ordering
- Including name tag holders
- Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device.
- Including suitable body trays 

Dimensions morgue refrigeration unit W/D/H: 2260 x 860 x 1960 mm
Dimensions doors W/H: 2000 x 500 mm

Type: KZM Q 40/300

Country of Origin: Federal Republic of Germany (European Union)


Suitable accessories:
Cooling aggregate TKT-80 – 1 piece
Shelf device REQ 30-03 – 1 piece
Body tray LM 80/101 – 3 pieces
Name tag holders made of chrome steel – 3 pieces


Cooling aggregate TKT-80 (ceiling design):
The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug.

Refrigerant: R 404A
Ambient temperature: from +5°C to +45°C

Technical details:
Temperature range: -15°C to -25°C
Voltage: 230 V / 1 Ph / 50 Hz
Refrigeration capacity -20°C inside +40°C outside: 1117 Watt
Rated Input (when normally running): 700 Watt
Rated Input: 4.4 Amp
Peak current: 30 Amp
Max current: 7.6 Amp
Defrost: Hot gas defrosting
Weight: 68 kg

Compressor:
Type:Hermetic
Normal power: 1300 Watt

Condenser:
Air flow: 750 m³/h

Evaporator:
Air flow: 550 m³/h
Air throw: 4 m (Standard / is affected by many factors)

Dimensions W/D/H: 620 x 719 x 357 mm
Dimensions Opening W/D: 550 x 337 mm (Distance between door and opening 587 mm)

Type: TKT 80


Shelf device REQ 30-03:
The shelf device serves to storage LM 80/101 body trays and is installed directly within a morgue refrigeration. The shelf device is loaded sideways by a lift and transport truck. The structure consists of rugged stainless steel profiles (Material 1.4301 – ANSI 304) which are equipped with two U-profiles to accommodate the body tray with 4 wheels. The shelf device will be delivered in single parts and is to be installed on location.

Dimensions W/D/H: 2100 x 700 x 1400 mm
Carrying capacity: max. 450kg

Type: REQ 30-03


Body tray LM 80/101:
The body tray serves to accommodate, store and transport bodies of deceased. A seamless deep-drawn, extremely rugged structure of ground stainless steel (material no. 1.4301 -ANSI 304) without welded corners and edges on the inside ensures perfect cleaning. 4 wheels under the body tray serve a perfect handling for sideway loading into the morgue cooler. The body tray is absolutely resistant to cleaning agents and disinfectants.

Dimensions W/D/H: 1900 x 620 x 100 mm
Caring capacity: max. 200 kg

Type: LM 80/101


Additionally available at an extra charge:
- Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304)
- Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches