Morgue Refrigeration Units for Coffin Transport Trucks with 1 Big Door for Standard Cooling from +10°C to -5°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. -The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of plastic coated, waterproof and non-slip sandwich board for wheel pressures up to 2000 N (200 Kp/rubber wheel) and surface pressures up to 30 kN/m” (3000 Kp/m² minimum bearing area per rubber wheel 4 cm²). - 1 large, lockable door with surrounding profile sealing - Door hinges can be either mounted on left or right side Dimensions morgue refrigeration unit W/D/H: 1210 x 2260 x 2260 mm Dimensions door W/H: 1000 x 2000 mm Type: KZS 40/200-TSB Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate KT-180 – 1 piece Press lever – 1 piece Ramp – 1 piece Coffing transport truck STW 53/115 – 1 piece Cooling aggregate KT-80 (ceiling design): The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: +10°C to -5°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 860 Watt Rated Input (when normally running): 600 Watt Rated Input: 3.5 Amp Peak current: 15 Amp Max current: 4.6 Amp Defrost: Hot gas defrosting Weight: 42 kg Compressor: Type:Hermetic Normal power: 400 Watt Condenser: Air flow: 400 m³/h Evaporator: Air flow: 500 m³/h Air throw: 3 m (Standard / is affected by many factors) Dimensions W/D/H: 430 x 771 x 378 mm Dimensions Opening W/D: 355 x 306 mm (Distance between door and opening 670 mm) Type: KT 80 Coffin transport truck STW 53/115 made of stainless steel with 2 levels: The coffin transport truck serves to accommodate 2 coffins. A rugged, torsion-resistant frame structure made of stainless steel with anti-slip supporting surface guarantees a firm hold of the coffins. The low deadweight permits easy handling and transport by one person. 4 solid wheels 2 fixed castors 2 steerable with break, d=125 mm with special ball bearings, permanently lubricated and maintenance-free which ensure absolutely noiseless movement. A sliding handle is mounted to the front end. Material: stainless steel Carrying capacity: max. 350 kg Dimensions W/D/H: 1200 x 750 x 1000 mm Type: STW 53/115 Country of Origin: Federal Republic of Germany (European Union) Morgue Refrigeration Units for Coffin Transport Trucks with 1 Big Door for Deep Freezing from -15°C to -25°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of plastic coated, waterproof and non-slip sandwich board for wheel pressures up to 2000 N (200 Kp/rubber wheel) and surface pressures up to 30 kN/m” (3000 Kp/m² minimum bearing area per rubber wheel 4 cm²). - 1 large, lockable door with surrounding profile sealing - Door hinges can be either mounted on left or right side Dimensions morgue refrigeration unit W/D/H: 1210 x 2260 x 2260 mm Dimensions door W/H: 1000 x 2000 mm Type: KZS 40/200-TSB Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate TKT-180 – 1 piece Press lever – 1 piece Ramp – 1 piece Coffing transport truck STW 53/115 – 1 piece Cooling aggregate TKT-180 (ceiling design): Cooling aggregate ready for immediate use. The cooling aggregate is directly mounted on top of a morgue refrigeration unit. The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: -15°C to -25°C Voltage: 400 V / 3 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 1714 Watt Rated Input (when normally running): 1000 Watt Rated Input: 6.3 Amp Peak current: 34 Amp Max current: 12 Amp Defrost: Hot gas defrosting Weight: 74 kg Compressor: Type: Hermetic Normal power: 700 Watt Condenser: Air flow: 1400 m³/h Evaporator: Air flow: 1100 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 820 x 809 x 390 mm Dimensions Opening W/D: 750 x 337 mm (Distance between door and opening 677 mm) Type: TKT-180 Coffin transport truck STW 53/115 made of stainless steel with 2 levels: The coffin transport truck serves to accommodate 2 coffins. A rugged, torsion-resistant frame structure made of stainless steel with anti-slip supporting surface guarantees a firm hold of the coffins. The low deadweight permits easy handling and transport by one person. 4 solid wheels 2 fixed castors 2 steerable with break, d=125 mm with special ball bearings, permanently lubricated and maintenance-free which ensure absolutely noiseless movement. A sliding handle is mounted to the front end. Material: stainless steel Carrying capacity: max. 350 kg Dimensions W/D/H: 1200 x 750 x 1000 mm Type: STW 53/115 Country of Origin: Federal Republic of Germany (European Union)