Morgue Refrigeration Units for 2 Coffins with Hatches for Standard Cooling from +10°C to -5°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - small hatches with surrounding profile sealing, each hatch can be locked individually - Door hinges can be either mounted on left or right side - Including name tag holders - Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable coffin plates Dimensions morgue refrigeration unit W/D/H: 1210 x 2260 x 2260 mm Dimensions hatches W/H: 800 x 800 mm Type: KZS 40/0200 Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate KT-80 – 1 piece Shelf device RE 30/-02– 1 piece Coffin plate made of aluminium SP 80/102– 2 pieces Name tag holders made of chrome steel – 2 pieces Cooling aggregate KT-80 (ceiling design): The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: +10°C to -5°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 860 Watt Rated Input (when normally running): 600 Watt Rated Input: 3.5 Amp Peak current: 15 Amp Max current: 4.6 Amp Defrost: Hot gas defrosting Weight: 42 kg Compressor: Type:Hermetic Normal power: 400 Watt Condenser: Air flow: 400 m³/h Evaporator: Air flow: 500 m³/h Air throw: 3 m (Standard / is affected by many factors) Dimensions W/D/H: 430 x 771 x 378 mm Dimensions Opening W/D: 355 x 306 mm (Distance between door and opening 670 mm) Type: KT 80 Shelf device STECK-RE 30/02: Sturdy construction made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. 2 holders are mounted on the rear side of the refrigeration unit to hold the roller tracks. The roller tracks can also be installed in reversed position so that the carrying rollers will overtop the roller track. The shelf devices can be easily dismantled without having to use any additional equipment in order to be able to clean the refrigeration unit from the inside. The shelf device is only suitable for refrigeration units with an interior width of 2100 mm Standard height 1st level: 240 mm (or as per your requirements) Standard height 2nd level: 820 mm (or as per your requirements) Dimensions W/D/H: 680 x 2100 x 820 mm Carrying capacity: 300 kg Type: STECK-RE 30/02 Country of Origin: Federal Republic of Germany (European Union) Coffin plate made of aluminium SP 80/102: To accommodate coffins of various sizes and designs. The coffin remains on the coffin plate during the whole time of storage. Thus, repeated relocations are not required. A sturdy, torsion-resistant structure made of aluminum with integrated reinforcements and 2 closed skids at the bottom ensure noiseless transport and additionally prevent lateral tipping of the coffin plate. The plate can be handled by one person. A slide handle is mounted to one front end. Dimensions W/D/H: 2000 x 700 x 45 mm Carrying capacity: max. 200 kg Type: SP 80/102 Additionally available at an extra charge: - Door heating mounted on a small hatch or large door to prevent collection of condensation water when the morgue refrigeration unit is used in tropical environments - Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches Morgue Refrigeration Units for 2 Coffins with Hatches for Deep Freezing from -15°C to -25°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - small hatches with surrounding profile sealing, each hatch can be locked individually - Door hinges can be either mounted on left or right side - Including name tag holders - Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable coffin plates Dimensions morgue refrigeration unit W/D/H: 1210 x 2260 x 2260 mm Dimensions hatches W/H: 800 x 800 mm Type: KZS 40/0200 Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate TKT-80 – 1 piece Shelf device RE 30/-02– 1 piece Coffin plate made of aluminium SP 80/102– 2 pieces Name tag holders made of chrome steel – 2 pieces Cooling aggregate TKT-80 (ceiling design): The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: -15°C to -25°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity -20°C inside +40°C outside: 1117 Watt Rated Input (when normally running): 700 Watt Rated Input: 4.4 Amp Peak current: 30 Amp Max current: 7.6 Amp Defrost: Hot gas defrosting Weight: 68 kg Compressor: Type:Hermetic Normal power: 1300 Watt Condenser: Air flow: 750 m³/h Evaporator: Air flow: 550 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 620 x 719 x 357 mm Dimensions Opening W/D: 550 x 337 mm (Distance between door and opening 587 mm) Type: TKT 80 Shelf device STECK-RE 30/02: Sturdy construction made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. 2 holders are mounted on the rear side of the refrigeration unit to hold the roller tracks. The roller tracks can also be installed in reversed position so that the carrying rollers will overtop the roller track. The shelf devices can be easily dismantled without having to use any additional equipment in order to be able to clean the refrigeration unit from the inside. The shelf device is only suitable for refrigeration units with an interior width of 2100 mm Standard height 1st level: 240 mm (or as per your requirements) Standard height 2nd level: 820 mm (or as per your requirements) Dimensions W/D/H: 680 x 2100 x 820 mm Carrying capacity: 300 kg Type: STECK-RE 30/02 Country of Origin: Federal Republic of Germany (European Union) Coffin plate made of aluminium SP 80/102: To accommodate coffins of various sizes and designs. The coffin remains on the coffin plate during the whole time of storage. Thus, repeated relocations are not required. A sturdy, torsion-resistant structure made of aluminum with integrated reinforcements and 2 closed skids at the bottom ensure noiseless transport and additionally prevent lateral tipping of the coffin plate. The plate can be handled by one person. A slide handle is mounted to one front end. Dimensions W/D/H: 2000 x 700 x 45 mm Carrying capacity: max. 200 kg Type: SP 80/102 Additionally available at an extra charge: - Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches Morgue Refrigeration Units for 4 Coffins with Hatches for Standard Cooling from +10°C to -5°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - small hatches with surrounding profile sealing, each hatch can be locked individually - Door hinges can be either mounted on left or right side - Including name tag holders - Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable coffin plates Dimensions morgue refrigeration unit W/D/H: 2260 x 2260 x 2260 mm Dimensions hatches W/H: 800 x 800 mm Type: KZS 40/0400 Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate KT-80 – 1 piece Shelf device STECK-RE 30/02 – 2 pieces Coffin plate made of aluminium SP 80/102– 4 pieces Name tag holders made of chrome steel – 2 pieces Cooling aggregate KT-80 (ceiling design): The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: +10°C to -5°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 860 Watt Rated Input (when normally running): 600 Watt Rated Input: 3.5 Amp Peak current: 15 Amp Max current: 4.6 Amp Defrost: Hot gas defrosting Weight: 42 kg Compressor: Type:Hermetic Normal power: 400 Watt Condenser: Air flow: 400 m³/h Evaporator: Air flow: 500 m³/h Air throw: 3 m (Standard / is affected by many factors) Dimensions W/D/H: 430 x 771 x 378 mm Dimensions Opening W/D: 355 x 306 mm (Distance between door and opening 670 mm) Type: KT 80 Shelf device STECK-RE 30/02: Sturdy construction made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. 2 holders are mounted on the rear side of the refrigeration unit to hold the roller tracks. The roller tracks can also be installed in reversed position so that the carrying rollers will overtop the roller track. The shelf devices can be easily dismantled without having to use any additional equipment in order to be able to clean the refrigeration unit from the inside. The shelf device is only suitable for refrigeration units with an interior width of 2100 mm Standard height 1st level: 240 mm (or as per your requirements) Standard height 2nd level: 820 mm (or as per your requirements) Dimensions W/D/H: 680 x 2100 x 820 mm Carrying capacity: 300 kg Type: STECK-RE 30/02 Country of Origin: Federal Republic of Germany (European Union) Coffin plate made of aluminium SP 80/102: To accommodate coffins of various sizes and designs. The coffin remains on the coffin plate during the whole time of storage. Thus, repeated relocations are not required. A sturdy, torsion-resistant structure made of aluminum with integrated reinforcements and 2 closed skids at the bottom ensure noiseless transport and additionally prevent lateral tipping of the coffin plate. The plate can be handled by one person. A slide handle is mounted to one front end. Dimensions W/D/H: 2000 x 700 x 45 mm Carrying capacity: max. 200 kg Type: SP 80/102 Additionally available at an extra charge: - Door heating mounted on a small hatch or large door to prevent collection of condensation water when the morgue refrigeration unit is used in tropical environments - Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches Morgue Refrigeration Units for 4 Coffins with Hatches for Deep Freezing from -15°C to -25°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - small hatches with surrounding profile sealing, each hatch can be locked individually - Door hinges can be either mounted on left or right side - Including name tag holders - Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable coffin plates Dimensions morgue refrigeration unit W/D/H: 2260 x 2260 x 2260 mm Dimensions hatches W/H: 800 x 800 mm Type: KZS 40/0400 Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate TKT-80 – 1 piece Shelf device STECK-RE 30/02 – 2 pieces Coffin plate made of aluminium SP 80/102– 4 pieces Name tag holders made of chrome steel – 2 pieces Cooling aggregate TKT-80 (ceiling design): The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: -15°C to -25°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity -20°C inside +40°C outside: 1117 Watt Rated Input (when normally running): 700 Watt Rated Input: 4.4 Amp Peak current: 30 Amp Max current: 7.6 Amp Defrost: Hot gas defrosting Weight: 68 kg Compressor: Type:Hermetic Normal power: 1300 Watt Condenser: Air flow: 750 m³/h Evaporator: Air flow: 550 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 620 x 719 x 357 mm Dimensions Opening W/D: 550 x 337 mm (Distance between door and opening 587 mm) Type: TKT 80 Shelf device STECK-RE 30/02: Sturdy construction made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. 2 holders are mounted on the rear side of the refrigeration unit to hold the roller tracks. The roller tracks can also be installed in reversed position so that the carrying rollers will overtop the roller track. The shelf devices can be easily dismantled without having to use any additional equipment in order to be able to clean the refrigeration unit from the inside. The shelf device is only suitable for refrigeration units with an interior width of 2100 mm Standard height 1st level: 240 mm (or as per your requirements) Standard height 2nd level: 820 mm (or as per your requirements) Dimensions W/D/H: 680 x 2100 x 820 mm Carrying capacity: 300 kg Type: STECK-RE 30/02 Country of Origin: Federal Republic of Germany (European Union) Coffin plate made of aluminium SP 80/102: To accommodate coffins of various sizes and designs. The coffin remains on the coffin plate during the whole time of storage. Thus, repeated relocations are not required. A sturdy, torsion-resistant structure made of aluminum with integrated reinforcements and 2 closed skids at the bottom ensure noiseless transport and additionally prevent lateral tipping of the coffin plate. The plate can be handled by one person. A slide handle is mounted to one front end. Dimensions W/D/H: 2000 x 700 x 45 mm Carrying capacity: max. 200 kg Type: SP 80/102 Additionally available at an extra charge: - Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches Morgue Refrigeration Units for 6 Coffins with Hatches for Standard Cooling from +10°C to -5°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - small hatches with surrounding profile sealing, each hatch can be locked individually - Door hinges can be either mounted on left or right side - Including name tag holders - Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable coffin plates Dimensions morgue refrigeration unit W/D/H: 3310 x 2260 x 2260 mm Dimensions hatches W/H: 800 x 800 mm Type: KZS 40/0600 Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate KT-100 – 1 piece Shelf device STECK-RE 30/02 – 3 piece Coffin plate made of aluminium SP 80/102– 6 pieces Name tag holders made of chrome steel – 6 pieces Cooling aggregate KT-100 (ceiling design): Cooling aggregate ready for immediate use. The cooling aggregate is directly mounted on top of a morgue refrigeration unit. The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: +10°C to -5°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 1090 Watt Rated Input (when normally running): 700 Watt Rated Input: 4.3 Amp Peak current: 25 Amp Max current: 7.9 Amp Defrost: Hot gas defrosting Weight: 59 kg Compressor: Type: Hermetic Normal power: 500 Watt Condenser: Air flow: 750 m³/h Evaporator: Air flow: 550 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 620 x 719 x 357 mm Dimensions Opening W/D: 550 x 337 mm (Distance between door and opening 587 mm) Type: KT-100 Shelf device STECK-RE 30/02: Sturdy construction made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. 2 holders are mounted on the rear side of the refrigeration unit to hold the roller tracks. The roller tracks can also be installed in reversed position so that the carrying rollers will overtop the roller track. The shelf devices can be easily dismantled without having to use any additional equipment in order to be able to clean the refrigeration unit from the inside. The shelf device is only suitable for refrigeration units with an interior width of 2100 mm Standard height 1st level: 240 mm (or as per your requirements) Standard height 2nd level: 820 mm (or as per your requirements) Dimensions W/D/H: 680 x 2100 x 820 mm Carrying capacity: 300 kg Type: STECK-RE 30/02 Country of Origin: Federal Republic of Germany (European Union) Coffin plate made of aluminium SP 80/102: To accommodate coffins of various sizes and designs. The coffin remains on the coffin plate during the whole time of storage. Thus, repeated relocations are not required. A sturdy, torsion-resistant structure made of aluminum with integrated reinforcements and 2 closed skids at the bottom ensure noiseless transport and additionally prevent lateral tipping of the coffin plate. The plate can be handled by one person. A slide handle is mounted to one front end. Dimensions W/D/H: 2000 x 700 x 45 mm Carrying capacity: max. 200 kg Type: SP 80/102 Additionally available at an extra charge: - Door heating mounted on a small hatch or large door to prevent collection of condensation water when the morgue refrigeration unit is used in tropical environments - Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches Morgue Refrigeration Units for 6 Coffins with Hatches for Deep Freezing from -15°C to -25°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - small hatches with surrounding profile sealing, each hatch can be locked individually - Door hinges can be either mounted on left or right side - Including name tag holders - Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable coffin plates Dimensions morgue refrigeration unit W/D/H: 3310 x 2260 x 2260 mm Dimensions hatches W/H: 800 x 800 mm Type: KZS 40/0600 Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate TKT-100 – 1 piece Shelf device STECK-RE 30/02 – 3 piece Coffin plate made of aluminium SP 80/102– 6 pieces Name tag holders made of chrome steel – 6 pieces Cooling aggregate TKT-100 (ceiling design): Cooling aggregate ready for immediate use. The cooling aggregate is directly mounted on top of a morgue refrigeration unit. The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: -15°C to -25°C Voltage: 400 V / 3 Ph / 50 Hz Refrigeration capacity -20°C inside +40°C outside: 1590 Watt Rated Input (when normally running): 1500 Watt Rated Input: 4.2 Amp Peak current: 27 Amp Max current: 4.9 Amp Defrost: Hot gas defrosting Weight: 87 kg Compressor: Type: Hermetic Normal power: 1500 Watt Condenser: Air flow: 1400 m³/h Evaporator: Air flow: 1400 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 820 x 809 x 390 mm Dimensions Opening W/D: 750 x 337 mm (Distance between door and opening 677 mm) Type: TKT-100 Shelf device STECK-RE 30/02: Sturdy construction made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. 2 holders are mounted on the rear side of the refrigeration unit to hold the roller tracks. The roller tracks can also be installed in reversed position so that the carrying rollers will overtop the roller track. The shelf devices can be easily dismantled without having to use any additional equipment in order to be able to clean the refrigeration unit from the inside. The shelf device is only suitable for refrigeration units with an interior width of 2100 mm Standard height 1st level: 240 mm (or as per your requirements) Standard height 2nd level: 820 mm (or as per your requirements) Dimensions W/D/H: 680 x 2100 x 820 mm Carrying capacity: 300 kg Type: STECK-RE 30/02 Country of Origin: Federal Republic of Germany (European Union) Coffin plate made of aluminium SP 80/102: To accommodate coffins of various sizes and designs. The coffin remains on the coffin plate during the whole time of storage. Thus, repeated relocations are not required. A sturdy, torsion-resistant structure made of aluminum with integrated reinforcements and 2 closed skids at the bottom ensure noiseless transport and additionally prevent lateral tipping of the coffin plate. The plate can be handled by one person. A slide handle is mounted to one front end. Dimensions W/D/H: 2000 x 700 x 45 mm Carrying capacity: max. 200 kg Type: SP 80/102 Additionally available at an extra charge: - Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches Morgue Refrigeration Units for 8 Coffins with Hatches for Standard Cooling from +10°C to -5°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - small hatches with surrounding profile sealing, each hatch can be locked individually - Door hinges can be either mounted on left or right side - Including name tag holders - Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable coffin plates Dimensions morgue refrigeration unit W/D/H: 4360 x 2260 x 2260 mm Dimensions hatches W/H: 800 x 800 mm Type: KZS 40/0800 Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate KT-130 – 1 piece Shelf device STECK-RE 30/02 – 4 pieces Coffin plate made of aluminium SP 80/102– 8 pieces Name tag holders made of chrome steel – 8 pieces Cooling aggregate KT-130 (ceiling design): Cooling aggregate ready for immediate use. The cooling aggregate is directly mounted on top of a morgue refrigeration unit. The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: +10°C to -5°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 1220 Watt Rated Input (when normally running): 800 Watt Rated Input: 5 Amp Peak current: 32 Amp Max current: 8.4 Amp Defrost: Hot gas defrosting Weight: 59 kg Compressor: Type: Hermetic Normal power: 600 Watt Condenser: Air flow: 750 m³/h Evaporator: Air flow: 550 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 620 x 719 x 357 mm Dimensions Opening W/D: 550 x 337 mm (Distance between door and opening 587 mm) Type: KT-130 Shelf device STECK-RE 30/02: Sturdy construction made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. 2 holders are mounted on the rear side of the refrigeration unit to hold the roller tracks. The roller tracks can also be installed in reversed position so that the carrying rollers will overtop the roller track. The shelf devices can be easily dismantled without having to use any additional equipment in order to be able to clean the refrigeration unit from the inside. The shelf device is only suitable for refrigeration units with an interior width of 2100 mm Standard height 1st level: 240 mm (or as per your requirements) Standard height 2nd level: 820 mm (or as per your requirements) Dimensions W/D/H: 680 x 2100 x 820 mm Carrying capacity: 300 kg Type: STECK-RE 30/02 Country of Origin: Federal Republic of Germany (European Union) Coffin plate made of aluminium SP 80/102: To accommodate coffins of various sizes and designs. The coffin remains on the coffin plate during the whole time of storage. Thus, repeated relocations are not required. A sturdy, torsion-resistant structure made of aluminum with integrated reinforcements and 2 closed skids at the bottom ensure noiseless transport and additionally prevent lateral tipping of the coffin plate. The plate can be handled by one person. A slide handle is mounted to one front end. Dimensions W/D/H: 2000 x 700 x 45 mm Carrying capacity: max. 200 kg Type: SP 80/102 Additionally available at an extra charge: - Door heating mounted on a small hatch or large door to prevent collection of condensation water when the morgue refrigeration unit is used in tropical environments - Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches Morgue Refrigeration Units for 8 Coffins with Hatches for Deep Freezing from -15°C to -25°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - small hatches with surrounding profile sealing, each hatch can be locked individually - Door hinges can be either mounted on left or right side - Including name tag holders - Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable coffin plates Dimensions morgue refrigeration unit W/D/H: 4360 x 2260 x 2260 mm Dimensions hatches W/H: 800 x 800 mm Type: KZS 40/0800 Country of Origin: Federal Republic of Germany (European Union) Suitable accessories: Cooling aggregate TKT-180 – 1 piece Shelf device STECK-RE 30/02 – 4 pieces Coffin plate made of aluminium SP 80/102– 8 pieces Name tag holders made of chrome steel – 8 pieces Cooling aggregate TKT-180 (ceiling design): Cooling aggregate ready for immediate use. The cooling aggregate is directly mounted on top of a morgue refrigeration unit. The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: -15°C to -25°C Voltage: 400 V / 3 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 1714 Watt Rated Input (when normally running): 1000 Watt Rated Input: 6.3 Amp Peak current: 34 Amp Max current: 12 Amp Defrost: Hot gas defrosting Weight: 74 kg Compressor: Type: Hermetic Normal power: 700 Watt Condenser: Air flow: 1400 m³/h Evaporator: Air flow: 1100 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 820 x 809 x 390 mm Dimensions Opening W/D: 750 x 337 mm (Distance between door and opening 677 mm) Type: TKT-180 Shelf device STECK-RE 30/02: Sturdy construction made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. 2 holders are mounted on the rear side of the refrigeration unit to hold the roller tracks. The roller tracks can also be installed in reversed position so that the carrying rollers will overtop the roller track. The shelf devices can be easily dismantled without having to use any additional equipment in order to be able to clean the refrigeration unit from the inside. The shelf device is only suitable for refrigeration units with an interior width of 2100 mm Standard height 1st level: 240 mm (or as per your requirements) Standard height 2nd level: 820 mm (or as per your requirements) Dimensions W/D/H: 680 x 2100 x 820 mm Carrying capacity: 300 kg Type: STECK-RE 30/02 Country of Origin: Federal Republic of Germany (European Union) Coffin plate made of aluminium SP 80/102: To accommodate coffins of various sizes and designs. The coffin remains on the coffin plate during the whole time of storage. Thus, repeated relocations are not required. A sturdy, torsion-resistant structure made of aluminum with integrated reinforcements and 2 closed skids at the bottom ensure noiseless transport and additionally prevent lateral tipping of the coffin plate. The plate can be handled by one person. A slide handle is mounted to one front end. Dimensions W/D/H: 2000 x 700 x 45 mm Carrying capacity: max. 200 kg Type: SP 80/102 Additionally available at an extra charge: - Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches Morgue Refrigeration Units for 10 Coffins with Hatches for Standard Cooling from +10°C to -5°C - with 80 mm isolation – The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - small hatches with surrounding profile sealing, each hatch can be locked individually - Door hinges can be either mounted on left or right side - Including name tag holders - Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable coffin plates Dimensions morgue refrigeration unit W/D/H: 5140 x 2260 x 2260 mm Dimensions hatches W/H: 800 x 800 mm Type: KZS 40/01000 Country of Origin: Federal Republic of Germany (European Union) Cooling aggregate KT-180 – 1 piece Shelf device STECK-RE 30/02 – 5 pieces Coffin plate made of aluminium SP 80/102– 10 pieces Name tag holders made of chrome steel – 10 pieces Cooling aggregate KT-180 (ceiling design): Cooling aggregate ready for immediate use. The cooling aggregate is directly mounted on top of a morgue refrigeration unit. The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: +10°C to -5°C Voltage: 230 V / 1 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 1714 Watt Rated Input (when normally running): 1000 Watt Rated Input: 6.3 Amp Peak current: 34 Amp Max current: 12 Amp Defrost: Hot gas defrosting Weight: 74 kg Compressor: Type: Hermetic Normal power: 700 Watt Condenser: Air flow: 1400 m³/h Evaporator: Air flow: 1100 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 820 x 809 x 390 mm Dimensions Opening W/D: 750 x 337 mm (Distance between door and opening 677 mm) Type: KT-180 Shelf device STECK-RE 30/02: Sturdy construction made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. 2 holders are mounted on the rear side of the refrigeration unit to hold the roller tracks. The roller tracks can also be installed in reversed position so that the carrying rollers will overtop the roller track. The shelf devices can be easily dismantled without having to use any additional equipment in order to be able to clean the refrigeration unit from the inside. The shelf device is only suitable for refrigeration units with an interior width of 2100 mm Standard height 1st level: 240 mm (or as per your requirements) Standard height 2nd level: 820 mm (or as per your requirements) Dimensions W/D/H: 680 x 2100 x 820 mm Carrying capacity: 300 kg Type: STECK-RE 30/02 Country of Origin: Federal Republic of Germany (European Union) Coffin plate made of aluminium SP 80/102: To accommodate coffins of various sizes and designs. The coffin remains on the coffin plate during the whole time of storage. Thus, repeated relocations are not required. A sturdy, torsion-resistant structure made of aluminum with integrated reinforcements and 2 closed skids at the bottom ensure noiseless transport and additionally prevent lateral tipping of the coffin plate. The plate can be handled by one person. A slide handle is mounted to one front end. Dimensions W/D/H: 2000 x 700 x 45 mm Carrying capacity: max. 200 kg Type: SP 80/102 Additionally available at an extra charge: - Door heating mounted on a small hatch or large door to prevent collection of condensation water when the morgue refrigeration unit is used in tropical environments - Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches Morgue Refrigeration Units for 10 Coffins with Hatches for Deep Freezing from -15°C to -25°C The morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site to a sturdy system by means of slot and key joints and integrated galvanized hook fasteners. The cell components are manufactured in a sandwich building system made of 80 mm CDC-free polyurethane rigid foam. - The surfaces of the morgue refrigeration unit are made of white power-coated, galvanized steel – alternatively stainless steel upon request - The floor is made of white powder-coated, galvanized steel - small hatches with surrounding profile sealing, each hatch can be locked individually - Door hinges can be either mounted on left or right side - Including name tag holders - Including suitable shelf device made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. - Including suitable coffin plates Dimensions morgue refrigeration unit W/D/H: 5140 x 2260 x 2260 mm Dimensions hatches W/H: 800 x 800 mm Type: KZS 40/01000 Country of Origin: Federal Republic of Germany (European Union) Cooling aggregate TKT-180 – 1 piece Shelf device STECK-RE 30/02 – 5 pieces Coffin plate made of aluminium SP 80/102– 10 pieces Name tag holders made of chrome steel – 10 pieces Cooling aggregate TKT-180 (ceiling design): Cooling aggregate ready for immediate use. The cooling aggregate is directly mounted on top of a morgue refrigeration unit. The sturdy housing has a low noise emittance, fully thermal, air cooled compressor. The safety utilities correspond to EN (DIN) standards, VDE regulations and VBG guidelines. Scope of delivery includes a high capacity evaporator with automatic defrosting, electrical temperature regulation and digital temperature indicator with connection line and shockproof plug. Refrigerant: R 404A Ambient temperature: from +5°C to +45°C Technical details: Temperature range: -15°C to -25°C Voltage: 400 V / 3 Ph / 50 Hz Refrigeration capacity 0°C inside +40°C outside: 1714 Watt Rated Input (when normally running): 1000 Watt Rated Input: 6.3 Amp Peak current: 34 Amp Max current: 12 Amp Defrost: Hot gas defrosting Weight: 74 kg Compressor: Type: Hermetic Normal power: 700 Watt Condenser: Air flow: 1400 m³/h Evaporator: Air flow: 1100 m³/h Air throw: 4 m (Standard / is affected by many factors) Dimensions W/D/H: 820 x 809 x 390 mm Dimensions Opening W/D: 750 x 337 mm (Distance between door and opening 677 mm) Type: TKT-180 Shelf device STECK-RE 30/02: Sturdy construction made of torsion-resistant stainless steel profiles. Each level has a roller track made of 30 x 60 mm stainless steel profiles with 5 carrying rollers made of corrosion-resistant material with plastic coating and maintenance-free roller bearings and a locking device. 2 holders are mounted on the rear side of the refrigeration unit to hold the roller tracks. The roller tracks can also be installed in reversed position so that the carrying rollers will overtop the roller track. The shelf devices can be easily dismantled without having to use any additional equipment in order to be able to clean the refrigeration unit from the inside. The shelf device is only suitable for refrigeration units with an interior width of 2100 mm Standard height 1st level: 240 mm (or as per your requirements) Standard height 2nd level: 820 mm (or as per your requirements) Dimensions W/D/H: 680 x 2100 x 820 mm Carrying capacity: 300 kg Type: STECK-RE 30/02 Country of Origin: Federal Republic of Germany (European Union) Coffin plate made of aluminium SP 80/102: To accommodate coffins of various sizes and designs. The coffin remains on the coffin plate during the whole time of storage. Thus, repeated relocations are not required. A sturdy, torsion-resistant structure made of aluminum with integrated reinforcements and 2 closed skids at the bottom ensure noiseless transport and additionally prevent lateral tipping of the coffin plate. The plate can be handled by one person. A slide handle is mounted to one front end. Dimensions W/D/H: 2000 x 700 x 45 mm Carrying capacity: max. 200 kg Type: SP 80/102 Additionally available at an extra charge: - Interior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Exterior panelling made of stainless steel (material no. 1.4301 – ANSI 304) - Opening control for large doors and small hatches to prevent uncontrolled opening of the doors and hatches