Staining Table, Wall Design, Width 1000 mm
This working table is equipped with a down-draft exhaust air system. It guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even suitable for small dissections. Airflow travels throughout the entire working area and is vacuumed out underneath, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system. 

The FT-1000 model includes the following features:
- Workstation with a large surface area 
- Entire construction is made of stainless steel
- Stable, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Very sturdy, perforated and removable working plates
- Integrated sprinkler system with adjustable valve for bath sanitation is located underneath the perforated working plates 
- Exhaust duct can be installed at the left or right side

Technical data:
Dimensions: W/D/H 1000 x 750 x 750 mm
Exhaust air capacity: 600 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: Stainless steel – material no. 1.4301 (ANSI 304)
Perforated working area:  approx. W/D 840 x 670 mm
Cold / Warm water connection: ½”
Waste water connection: 2”
Exhaust duct diameter: 200 mm

Type: FT-1000



Staining Table, Wall Design, Width 1250 mm
This working table is equipped with a down-draft exhaust air system. It guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even suitable for small dissections. Airflow travels throughout the entire working area and is vacuumed out underneath, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system.

The FT-1200 model includes the following features:
- Workstation with a large surface area 
- Entire construction is made of stainless steel
- Stable, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Very sturdy, perforated and removable working plates
- Integrated sprinkler system with adjustable valve for bath sanitation is located underneath the perforated working plates 
- Exhaust duct can be installed at the left or right side

TECHNICAL DATA
Dimensions: W/D/H 1250 x 750 x 750 mm
Exhaust air capacity: 800 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: Stainless steel – material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1040 x 670 mm
Cold / Warm water connection: ½”
Waste water connection: 2”
Exhaust duct diameter: 200 mm

Type: FT-1250



Staining Table, Wall Design, Width 1500 mm
This working table is equipped with a down-draft exhaust air system. It guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even suitable for small dissections. Airflow travels throughout the entire working area and is vacuumed out underneath, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system. 

The FT-1500 model includes the following features:
- Workstation with a large surface area 
- Entire construction is made of stainless steel
- Stable, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Very sturdy, perforated and removable working plates
- Integrated sprinkler system with adjustable valve for bath sanitation is located underneath the perforated working plates 
- Exhaust duct can be installed at the left or right side

TECHNICAL DATA
Dimensions: W/D/H 1500 x 750 x 750 mm
Exhaust air capacity: 1000 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: Stainless steel ground – material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1340 x 670 mm
Cold / Warm water connection: ½”
Waste water connection: 2”
Exhaust duct diameter: 200 mm

Type: FT-1500




Staining Table, Wall Design, Width 1750 mm
This working table is equipped with a down-draft exhaust air system. It guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even suitable for small dissections. Airflow travels throughout the entire working area and is vacuumed out underneath, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system.

The FT-1750 model includes the following features:
- Workstation with a large surface area 
- Entire construction is made of stainless steel
- Stable, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Very sturdy, perforated and removable working plates
- Integrated sprinkler system with adjustable valve for bath sanitation is located underneath the perforated working plates 
- Exhaust duct can be installed at the left or right side

TECHNICAL DATA
Dimensions: W/D/H 1750 x 750 x 750 mm
Exhaust air capacity: 1200 m3/h
Air speed at the perforated surface: min. 0.4m/sec
Material: Stainless steel – material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1590 x 670 mm
Cold / Warm water connection: ½”
Waste water connection: 2”
Exhaust duct diameter: 250 mm

Type: FT-1750




Staining Table, Wall Design, Width 2000 mm
This working table is equipped with a down-draft exhaust air system. It guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even suitable for small dissections. Airflow travels throughout the entire working area and is vacuumed out underneath, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system. 

The FT-2000 model includes the following features:
- Workstation with a large surface area 
- Entire construction is made of stainless steel
- Stable, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Very sturdy, perforated and removable working plates
- Integrated sprinkler system with adjustable valve for bath sanitation is located underneath the perforated working plates 
- Exhaust duct can be installed at the left or right side

TECHNICAL DATA
Dimensions: W/D/H 2000 x 750 x 750 mm
Exhaust air capacity: 1400 m³/h
Air speed onto the perforated surface: min. 0.4m/sec
Material: Stainless steel – material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 1840 x 670 mm
Cold / Warm water connection: ½”
Waste water connection: 2”
Exhaust duct diameter: 250 mm

Type: FT-2000



Staining Table, Wall Design, Width 2250 mm
This working table is equipped with a down-draft exhaust air system. It guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even suitable for small dissections. Airflow travels throughout the entire working area and is vacuumed out underneath, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system. 

The FT-2250 model includes the following features:
- Workstation with a large surface area 
- Entire construction is made of stainless steel
- Stable, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Very sturdy, perforated and removable working plates
- Integrated sprinkler system with adjustable valve for bath sanitation is located underneath the perforated working plates 
- Exhaust duct can be installed at the left or right side

TECHNICAL DATA
Dimensions: W/D/H 2250 x 750 x 750 mm
Exhaust air capacity: 1600 m³/h
Air speed at the perforated surface: min. 0.4m/sec
Material: Stainless steel – material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 2090 x 670 mm
Cold / Warm water connection: ½”
Waste water connection: 2”
Exhaust duct diameter: 250 mm

Type: FT-2250




Staining Table, Wall Design, Width 2500 mm
This working table is equipped with a down-draft exhaust air system. It guarantees a laboratory environment free of pollutants while slicing and preparing histological slide preparations and is even suitable for small dissections. Airflow travels throughout the entire working area and is vacuumed out underneath, which provides optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values for formalin are below target throughout the entire vacuum-effected area. The cutting table is to be connected to a site-mounted exhaust system. 

The FT-2500 model includes the following features:
- Workstation with a large surface area 
- Entire construction is made of stainless steel
- Stable, self-supporting undercarriage with adjustable legs
- Low overall height of the upper structure increases leg room
- Very sturdy, perforated and removable working plates
- Integrated sprinkler system with adjustable valve for bath sanitation is located underneath the perforated working plates 
- Exhaust duct can be installed at the left or right side

TECHNICAL DATA
Dimensions: W/D/H 2500 x 750 x 750 mm
Exhaust air capacity: 1800 m3/h
Air speed at the perforated surface: min. 0.4m/sec
Material: Stainless steel – material no. 1.4301 (ANSI 304)
Perforated working area: approx. W/D 2340 x 670 mm
Cold / Warm water connection: ½”
Waste water connection: 2”
Exhaust duct diameter: 250 mm

Type: FT-2500