Waterproof Autopsy Saw SF-4000 with Vacuum Cleaner
Designed for the hospital environment, the SF-4000 is the most silent medical cutter on the market. For the cast room this reduces operator fatigue and helps keep the patients calm too. Toxic dust, finely divided silica, and other hazardous airborne particles are all removed at source by the SF's optional vacuum system which filters particles to 0.6 microns. The negative pressure extraction unit is a typical example of SF's thoughtful design, allowing operators to change the bag without risk of losing the content.

Vacuum unit:
Motor max. consumption: 1100 watts
Rate: 900 watts
Container capacity: 7 liters
Air Volume Open (max.): 32 liters/sec.
Max. Vacuum Closed: 1650mm WG
Filtration: 99,997% at 0.6 micron to BS3928
Certificate supplied
Dimensions: Height 760 mm incl. Chassis
Diameter 225 
Weight: 11.5 kg
Voltage: 220/230 Volt / 50/60 Hz or 110 Volt

Power supply:
Transformer: to BS415
Output to Saw: 40 Volt DC
Enclosure: to BS5490, IEC529, DIN 40050
Protected: to IP 44
Protection: Electronic current limiting device, double fused
Constructed: to BS5724 and IEC 601
Weight: 1.7 kg
Input Voltage: 220/230 Volt / 50/60 Hz or 110 Volt
Cable: 3.5 meters

Hand piece:
Motor: DC, permanent magnet
Speed: no load 12000 cycles/min.
Current: not load 40 Volt DC / 0.75 Amp
Typical load: 1.5 Amp
Construction: Anodized aluminium body with 4 bearing sealed mechanism protected to IP 67
Audio output: 37db (A) no blade
Weight: 1.4 kg
Type: SF-4000

complete with 3 blades – 1 x 51mm segmented, 1 x 64mm round, 1 x 76mm round

Country of Origin: Great Britain (European Union)




Waterproof Autopsy Saw SF-4000 without Vacuum Cleaner
Designed for the hospital environment, the SF-4000 is the most silent medical cutter on the market. For the cast room this reduces operator fatigue and helps keep the patients calm too.

Power supply:
Transformer: to BS415
Output to Saw: 40 Volt DC
Enclosure: to BS5490, IEC529, DIN 40050
Protected: to IP 44
Protection: Electronic current limiting device, double fused
Constructed: to BS5724 and IEC 601
Weight: 1,7 kg
Input Voltage: 230 Volt / 50 Hz or 110 Volt
Cable: 3,5 meters

Hand piece:
Motor: DC, permanent magnet
Speed: no load 12000 cycles/min.
Current: not load 40 Volt DC / 0,75 Amp
Typical load: 1,5 Amp
Construction: Anodized aluminium body with 4 bearing sealed mechanism protected to IP 67
Audio output: 37db(A) no blade
Weight: 1,4 kg

Type: SF-4000_oAbs